What are the highlights of 3.0 all in 1 hdd docking

3.0 all in 1 hdd docking‍ can turn ordinary solid-state drives into portable removable storage devices, and this NVMe mobile hard drive is much smaller than traditional mechanical mobile hard drives, and the transfer rate is also increased several times. Real-time file transfer, let

3.0 all in 1 hdd docking‍ can turn ordinary solid-state drives into portable removable storage devices, and this NVMe mobile hard drive is much smaller than traditional mechanical mobile hard drives, and the transfer rate is also increased several times. Real-time file transfer, let's take a look at the highlights of this mobile solid-state drive combination.

1. Good heat dissipation effect

From the appearance, the NVME SSD hard disk box is made of a combination of plastic and aluminum alloy materials. The non-all-metal material reduces the weight to a certain extent, and the entire cover adopts the CNC integrated molding process. Further down is a PCBA copper strip motherboard, which can also quickly absorb and dissipate heat. Two silicone thermal pads are also included, so from the motherboard to the heat dissipation fins, there is a strong and effective heat dissipation guarantee to deal with the high heat problem caused by high-speed data transmission.

2. Fast transfer speed

The core of the mainstream USB3.2 NVME hard disk is that the ASM2364 chip supports USB 3.2 Gen2*2, and the transmission bandwidth can reach 20Gbps. What is the concept of 20Gbps? The conversion is the transfer speed of 2GB/S. If this was unimaginable in the past, let alone 2000MB/S for traditional mechanical hard drives, 200MB/S cannot be reached. More importantly, the speed of the newly listed USB4.0 hard disk enclosures has been doubled.

3. Good expansion performance

Type-C USB 3.2 Gen 2x2 20Gbps can use an expansion card, which is actually a PCIE-to-USB expansion card, which will occupy a PCIE slot. The extra PCIE card slot on the motherboard can realize the data transmission at will. And just disassemble the host, insert it into the motherboard, and then tighten the fastening screws. There is no need to install the driver and it can be used directly after booting.

3.0 all in 1 hdd docking‍ can turn ordinary solid state drives into mobile hard drives that are more convenient to use. And make the mobile hard disk speed have a qualitative leap. From the speed of less than 200MB/S to 2000MB/S per second, the speed has almost increased by at least 10 times. It has greatly enriched our work and life application scenarios, and its appearance may make the traditional U disk or mobile mechanical hard disk slowly fade out of people's vision.

3.0 all in 1 hdd docking https://www.fideco.net/2-bay-hdd-docking-with-usb-3-ports-and-offline-clone.html


huidegui huidegui

2 Blog posts

Comments