What is the purpose of a tenoner?

What is the purpose of a tenoner?

Tenoners are woodworking machines that are used to produce tenons, projecting wooden members that fit into a mortise. Typically, tenoners are used with a router and equipped with router spindles.Get more news about Rectangular Tenoner Making,you can vist our website!

What is a Tenoner?
A tenon is the end of timber shaped to fit in a mortise and make a joint. A traditional tenoner is a floor-mounted machine tool, with pairs of cutting heads to shape the tenon. ... A more modern type of tenoner has a single cutting head that is programmed to follow a particular path to shape the tenon.

What does a single end tenoner do?
Single End Tenoning machine

Used to cut tenon profiles for mortice holes, across the grain. The workpiece is held in place by pads. The operator works close to the cutting heads, so guarding is important.

What is Double end Tenoner?
Double end tenoners work simoultaneously on both panel sides during the material is transported along the processing motors by means of special chain conveyors. Therefore these machines achieve a very high output combined with high processing precsion and accuracy.

What is a tenoning machine?
Tenoning machines use cutter heads and/or saw blades to form projections (tenons) on pieces of stock. Each tenon can be inserted into a cavity (mortise) on another piece of wood to form a mortise and tenon joint. The figure to the right shows a single-end tenoning machine.
A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber (timber), such as a mortise in a mortise and tenon joint.

How does a spindle moulder work?
The spindle is controlled by 'rise and fall' mechanism operated by a handwheel which determines how much and where the cutter profile cuts the timber. ... Compared to its smaller cousin, the router table, a spindle moulder is able to produce work with a much larger profile such as a crown moulding.

What can I do with a spindle moulder?
One of the most versatile machines in woodworking, it can be used for mouldings, rebates and curved work. However, it can be dangerous if not used correctly, because of the risk of contact with the tool, and ejection of the tool part or workpiece.


freeamfva

1222 Blog posts

Comments